### Related Software

#### MITCalc Technical Formulas and Tools 1.22MITCalc

... Selection from a list of typical vehicles. - Calculation of forces. - Calculation of the load, energy, consumption and travel distance. ... Selection from the list of typical bullets. - Calculation and selection of typical ballistic coefficients. - Calculation of the forces, velocities, trajectories, angles and other ... a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, .... Free download of MITCalc Technical Formulas and Tools 1.22

#### MITCalc Torsion Springs 1.22MITCalc

The calculation is intended for the purposes of geometric and ... Cold formed springs and Hot formed springs - Calculation of the working forces of a spring with known production and mounting dimensions. - Calculation of mounting dimensions for known spring loading and ... ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). The calculation is based on data, procedures and algorithms from .... Free download of MITCalc Torsion Springs 1.22

#### MITCalc Worm Gear Calculation 1.18MITCalc

... units and solves the following main tasks: - Calculation of gearing dimensions. - Automatic transmission design with ... requirements. - Design for safety coefficients entered. - Calculation of a table of proper solutions. - Calculation of complete geometrical parameters. - Calculation of strength parameters, safety check. - Gearing design for precise centre-line distance. - Auxiliary calculations (heating, shaft design). - Support of 2D and .... Free download of MITCalc Worm Gear Calculation 1.18

#### MITCalc Rolling Bearings Calculation III 1.18MITCalc

This calculation can be used for the selection, calculation and check of rolling bearings of the company ... SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller .... Free download of MITCalc Rolling Bearings Calculation III 1.18

#### MITCalc Internal Spur Gear Calculation 1.21MITCalc

... units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design ... for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - ... (balancing specific slips, miminizing specific slips, strength...). - Calculation of strength parameters, safety check. - Design of .... Free download of MITCalc Internal Spur Gear Calculation 1.21

#### MITCalc V-Belts Calculation 1.22MITCalc

The calculation is designed for a geometrical design and strength ... units and solves the following main tasks: - Calculation for 2 or 3 pulleys. - Automatic design ... the minimum of input requirements. - Design and calculation of geometrical parameters (diameters of pulleys, axis distances, ... of the belt, weight of the transmission) - Calculation of strength parameters (power transferred by the belt, .... Free download of MITCalc V-Belts Calculation 1.22

#### MITCalc Force shaft connection 1.20MITCalc

The calculation is intended for geometrical design and strength check ... interference fit working at specific service temperature. The calculation is based on data, procedures and algorithms from ... a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many .... Free download of MITCalc Force shaft connection 1.20

#### MITCalc Profiles Calculation 1.20MITCalc

The calculation solves area characteristics of profiles created in a ... a profile in a simple graphic editor. - Calculation of area characteristics (Ix, Sx) for main axes passing through the centre of gravity. - Calculation of area characteristics (Ix, Sx) for randomly turned ... the centre of gravity, including a graph. - Calculation of characteristics for the turned axes which pass .... Free download of MITCalc Profiles Calculation 1.20

#### MITCalc Multi pulley calculation 1.21MITCalc

The calculation is developed for geometrical designs of belt and ... units and solves the following main tasks: - Calculation of the necessary length of the belt (chain) ... the position of the selected sprocket wheel. - Calculation of geometry (angles of wrapping, numbers of teeth in engagement, axis distances, etc.) - Calculation of the radial force acting on the sprocket .... Free download of MITCalc Multi pulley calculation 1.21

#### MITCalc Tension Springs 1.22MITCalc

The calculation is intended for the purposes of geometric and ... Cold formed springs and Hot formed springs - Calculation of working forces of a spring of known production and mounting dimensions. - Calculation of mounting dimensions for a known loading and ... ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). The calculation is based on data, procedures and algorithms from .... Free download of MITCalc Tension Springs 1.22

#### MITCalc Roller Chains Calculation 1.21MITCalc

The calculation is designed for a geometrical design and strength ... transmission alternative regarding power, geometry and weight. - Calculation of geometric, strength, safety and operational parameters. - Calculation of power parameters and axis loads. - Support ... application includes corresponding databases of roller chains. The calculations use data, procedures, algorithms and data from ANSI/ASME, .... Free download of MITCalc Roller Chains Calculation 1.21

#### MITCalc Bevel Gear Calculation 1.20MITCalc

... units and solves the following main tasks: - Calculation of straight, helical and curved toothing. - Automatic ... for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - Calculation of strength parameters, safety check. - Supplementary calculations (calculation of parameters of the existing gear, temperature .... Free download of MITCalc Bevel Gear Calculation 1.20

#### MITCalc Rolling Bearings Calculation II 1.20MITCalc

This module can be used for the selection, calculation and check of rolling bearings. The programme provides ... NTN Bearing Corporation and INA USA Corporation - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller .... Free download of MITCalc Rolling Bearings Calculation II 1.20

#### MITCalc Compression Springs 1.22MITCalc

The calculation is intended for the purposes of geometric and ... Cold formed springs and Hot formed springs - Calculation of working forces of a spring of known production and installation dimensions. - Calculation of installation dimensions for known loading and production ... ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo). The calculation is based on data, procedures, algorithms and data .... Free download of MITCalc Compression Springs 1.22

#### MITCalc Slender strut buckling 1.20MITCalc

... Selection of six basic types of buckling. - Calculation of area characteristics of 20 types of cross-sections. ... load. - Strength check of the strut. - Calculation and graphical representation of permitted stress dependent on ... L and T profiles according to DIN/ISO. The calculation is based on data, procedures, algorithms (Johnson, Tetmajer, .... Free download of MITCalc Slender strut buckling 1.20

#### MITCalc Shaft connection 1.23MITCalc

The calculation is designed for geometric designs and strength checks ... IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD). The calculation is based on data, procedures and algorithms from ... 30 1385, CSN 01 4942, CSN 4950 The calculation contain also solution for Involute splines. Involute splines The calculation is designed to create a detail drawing (model) .... Free download of MITCalc Shaft connection 1.23

#### MITCalc Timing Belts Calculation 1.21MITCalc

The calculation is designed for a geometrical design and strength ... - Option of designing a non-standard transmission. - Calculation of all necessary strength and geometrical parameters. - Calculation of power parameters and axis loads. - Support ... the respective models of pulleys and belts. The calculations use procedures, algorithms and data from ANSI, RMA .... Free download of MITCalc Timing Belts Calculation 1.21

#### MITCalc Tolerance analysis 1.19MITCalc

... ISO, DIN and other standards are used in calculation. List of standards: ANSI B4.1, ISO 286, ISO ... a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many .... Free download of MITCalc Tolerance analysis 1.19

#### MITCalc Spur Gear Calculation 1.24MITCalc

... units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design ... for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - ... (balancing specific slips, miminizing specific slips, strength...). - Calculation of strength parameters, safety check. - Design of .... Free download of MITCalc Spur Gear Calculation 1.24

#### MITCalc Welded connections 1.15MITCalc

The calculation is intended for the geometrical design and strength ... connections stressed by various combinations of load. The calculation deals with the following tasks: - Design of ... U, L sections according to DIN/EN/ISO. - The calculation is based on data, procedures and algorithms from ... a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, .... Free download of MITCalc Welded connections 1.15

#### MITCalc Shafts Calculation 1.24MITCalc

The calculation is designed for geometrical design and complex strength ... Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration. - Simple definition of spatial shaft load. - Calculation of reactions, courses of forces, moments, stress, deflection ... bending angle of the shaft and others. - Calculation of critical speed and safety coefficients. - Support .... Free download of MITCalc Shafts Calculation 1.24

#### MITCalc Rolling Bearings Calculation I 1.20MITCalc

This module can be used for the selection, calculation and check of rolling bearings of the company ... SKF in all basic types and design. - Calculation of basic bearing parameters (life, static safety, etc.). - Calculation of adjusted bearing life acc. to the new methodology of ISO 281. - Calculation of load with a pair of tapered roller .... Free download of MITCalc Rolling Bearings Calculation I 1.20

#### MITCalc Springs 15 types 1.17MITCalc

The calculation is to be used for geometrical and strength ... the following main tasks: 1) Geometrical design and calculation of working cycle parameters for metal springs of ... BS, JIS, UNI, SIS, CSN and others. The calculation is based on data, procedures, algorithms and data ... This module is a part of MITCalc - Calculation Package for gear, belt and chain drives, springs, .... Free download of MITCalc Springs 15 types 1.17

#### MITCalc Planet Gear Calculation 1.17MITCalc

... units and solves the following main tasks: - Calculation of helical and straight toothing. - Automatic design ... for entered coefficients of safety (static, dynamic). - Calculation of complete geometric parameters (including corrected toothing). - ... (balancing specific slips, miminizing specific slips, strength...). - Calculation of strength parameters, safety check. - Design of .... Free download of MITCalc Planet Gear Calculation 1.17

#### MITCalc Tolerances 1.20MITCalc

This calculation includes tables and calculations for easy option of fits of machine parts ... ISO, DIN and others were used in the calculations. Used standards: ANSI B4.1, ANSI B4.2, ISO 286, ... a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many .... Free download of MITCalc Tolerances 1.20

## beam calculation web results

``` SERVER:array(45) {
["REDIRECT_UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["REDIRECT_SCRIPT_URL"]=>
["REDIRECT_SCRIPT_URI"]=>
["REDIRECT_PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["REDIRECT_HTTPS"]=>
string(2) "on"
["REDIRECT_SSL_TLS_SNI"]=>
["REDIRECT_STATUS"]=>
string(3) "200"
["UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["SCRIPT_URL"]=>
["SCRIPT_URI"]=>
["PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["HTTPS"]=>
string(2) "on"
["SSL_TLS_SNI"]=>
["HTTP_USER_AGENT"]=>
string(40) "CCBot/2.0 (https://commoncrawl.org/faq/)"
["HTTP_ACCEPT"]=>
string(63) "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"
["HTTP_ACCEPT_LANGUAGE"]=>
string(14) "en-US,en;q=0.5"
["HTTP_IF_MODIFIED_SINCE"]=>
string(29) "Tue, 10 Dec 2019 20:17:58 GMT"
["HTTP_ACCEPT_ENCODING"]=>
string(7) "br,gzip"
["HTTP_HOST"]=>
["HTTP_CONNECTION"]=>
string(10) "Keep-Alive"
["PATH"]=>
string(49) "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"
["SERVER_SIGNATURE"]=>
string(0) ""
["SERVER_SOFTWARE"]=>
string(52) "Apache/2.4.6 (CentOS) OpenSSL/1.0.2k-fips PHP/5.4.16"
["SERVER_NAME"]=>
string(11) "45.55.49.28"
["SERVER_PORT"]=>
string(3) "443"
string(11) "3.92.74.105"
["DOCUMENT_ROOT"]=>
["REQUEST_SCHEME"]=>
string(5) "https"
["CONTEXT_PREFIX"]=>
string(0) ""
["CONTEXT_DOCUMENT_ROOT"]=>
["SCRIPT_FILENAME"]=>
["REMOTE_PORT"]=>
string(5) "46922"
["REDIRECT_QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REDIRECT_URL"]=>
["GATEWAY_INTERFACE"]=>
string(7) "CGI/1.1"
["SERVER_PROTOCOL"]=>
string(8) "HTTP/1.1"
["REQUEST_METHOD"]=>
string(3) "GET"
["QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REQUEST_URI"]=>
["SCRIPT_NAME"]=>
string(21) "/software-search.html"
["PHP_SELF"]=>
string(21) "/software-search.html"
["REQUEST_TIME_FLOAT"]=>
float(1601079679.255)
["REQUEST_TIME"]=>
int(1601079679)
}
```

``` SERVER:array(45) {
["REDIRECT_UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["REDIRECT_SCRIPT_URL"]=>
["REDIRECT_SCRIPT_URI"]=>
["REDIRECT_PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["REDIRECT_HTTPS"]=>
string(2) "on"
["REDIRECT_SSL_TLS_SNI"]=>
["REDIRECT_STATUS"]=>
string(3) "200"
["UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["SCRIPT_URL"]=>
["SCRIPT_URI"]=>
["PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["HTTPS"]=>
string(2) "on"
["SSL_TLS_SNI"]=>
["HTTP_USER_AGENT"]=>
string(40) "CCBot/2.0 (https://commoncrawl.org/faq/)"
["HTTP_ACCEPT"]=>
string(63) "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"
["HTTP_ACCEPT_LANGUAGE"]=>
string(14) "en-US,en;q=0.5"
["HTTP_IF_MODIFIED_SINCE"]=>
string(29) "Tue, 10 Dec 2019 20:17:58 GMT"
["HTTP_ACCEPT_ENCODING"]=>
string(7) "br,gzip"
["HTTP_HOST"]=>
["HTTP_CONNECTION"]=>
string(10) "Keep-Alive"
["PATH"]=>
string(49) "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"
["SERVER_SIGNATURE"]=>
string(0) ""
["SERVER_SOFTWARE"]=>
string(52) "Apache/2.4.6 (CentOS) OpenSSL/1.0.2k-fips PHP/5.4.16"
["SERVER_NAME"]=>
string(11) "45.55.49.28"
["SERVER_PORT"]=>
string(3) "443"
string(11) "3.92.74.105"
["DOCUMENT_ROOT"]=>
["REQUEST_SCHEME"]=>
string(5) "https"
["CONTEXT_PREFIX"]=>
string(0) ""
["CONTEXT_DOCUMENT_ROOT"]=>
["SCRIPT_FILENAME"]=>
["REMOTE_PORT"]=>
string(5) "46922"
["REDIRECT_QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REDIRECT_URL"]=>
["GATEWAY_INTERFACE"]=>
string(7) "CGI/1.1"
["SERVER_PROTOCOL"]=>
string(8) "HTTP/1.1"
["REQUEST_METHOD"]=>
string(3) "GET"
["QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REQUEST_URI"]=>
["SCRIPT_NAME"]=>
string(21) "/software-search.html"
["PHP_SELF"]=>
string(21) "/software-search.html"
["REQUEST_TIME_FLOAT"]=>
float(1601079679.255)
["REQUEST_TIME"]=>
int(1601079679)
}
```
``` SERVER:array(45) {
["REDIRECT_UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["REDIRECT_SCRIPT_URL"]=>
["REDIRECT_SCRIPT_URI"]=>
["REDIRECT_PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["REDIRECT_HTTPS"]=>
string(2) "on"
["REDIRECT_SSL_TLS_SNI"]=>
["REDIRECT_STATUS"]=>
string(3) "200"
["UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["SCRIPT_URL"]=>
["SCRIPT_URI"]=>
["PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["HTTPS"]=>
string(2) "on"
["SSL_TLS_SNI"]=>
["HTTP_USER_AGENT"]=>
string(40) "CCBot/2.0 (https://commoncrawl.org/faq/)"
["HTTP_ACCEPT"]=>
string(63) "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"
["HTTP_ACCEPT_LANGUAGE"]=>
string(14) "en-US,en;q=0.5"
["HTTP_IF_MODIFIED_SINCE"]=>
string(29) "Tue, 10 Dec 2019 20:17:58 GMT"
["HTTP_ACCEPT_ENCODING"]=>
string(7) "br,gzip"
["HTTP_HOST"]=>
["HTTP_CONNECTION"]=>
string(10) "Keep-Alive"
["PATH"]=>
string(49) "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"
["SERVER_SIGNATURE"]=>
string(0) ""
["SERVER_SOFTWARE"]=>
string(52) "Apache/2.4.6 (CentOS) OpenSSL/1.0.2k-fips PHP/5.4.16"
["SERVER_NAME"]=>
string(11) "45.55.49.28"
["SERVER_PORT"]=>
string(3) "443"
string(11) "3.92.74.105"
["DOCUMENT_ROOT"]=>
["REQUEST_SCHEME"]=>
string(5) "https"
["CONTEXT_PREFIX"]=>
string(0) ""
["CONTEXT_DOCUMENT_ROOT"]=>
["SCRIPT_FILENAME"]=>
["REMOTE_PORT"]=>
string(5) "46922"
["REDIRECT_QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REDIRECT_URL"]=>
["GATEWAY_INTERFACE"]=>
string(7) "CGI/1.1"
["SERVER_PROTOCOL"]=>
string(8) "HTTP/1.1"
["REQUEST_METHOD"]=>
string(3) "GET"
["QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REQUEST_URI"]=>
["SCRIPT_NAME"]=>
string(21) "/software-search.html"
["PHP_SELF"]=>
string(21) "/software-search.html"
["REQUEST_TIME_FLOAT"]=>
float(1601079679.255)
["REQUEST_TIME"]=>
int(1601079679)
}
```
``` SERVER:array(45) {
["REDIRECT_UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["REDIRECT_SCRIPT_URL"]=>
["REDIRECT_SCRIPT_URI"]=>
["REDIRECT_PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["REDIRECT_HTTPS"]=>
string(2) "on"
["REDIRECT_SSL_TLS_SNI"]=>
["REDIRECT_STATUS"]=>
string(3) "200"
["UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["SCRIPT_URL"]=>
["SCRIPT_URI"]=>
["PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["HTTPS"]=>
string(2) "on"
["SSL_TLS_SNI"]=>
["HTTP_USER_AGENT"]=>
string(40) "CCBot/2.0 (https://commoncrawl.org/faq/)"
["HTTP_ACCEPT"]=>
string(63) "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"
["HTTP_ACCEPT_LANGUAGE"]=>
string(14) "en-US,en;q=0.5"
["HTTP_IF_MODIFIED_SINCE"]=>
string(29) "Tue, 10 Dec 2019 20:17:58 GMT"
["HTTP_ACCEPT_ENCODING"]=>
string(7) "br,gzip"
["HTTP_HOST"]=>
["HTTP_CONNECTION"]=>
string(10) "Keep-Alive"
["PATH"]=>
string(49) "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"
["SERVER_SIGNATURE"]=>
string(0) ""
["SERVER_SOFTWARE"]=>
string(52) "Apache/2.4.6 (CentOS) OpenSSL/1.0.2k-fips PHP/5.4.16"
["SERVER_NAME"]=>
string(11) "45.55.49.28"
["SERVER_PORT"]=>
string(3) "443"
string(11) "3.92.74.105"
["DOCUMENT_ROOT"]=>
["REQUEST_SCHEME"]=>
string(5) "https"
["CONTEXT_PREFIX"]=>
string(0) ""
["CONTEXT_DOCUMENT_ROOT"]=>
["SCRIPT_FILENAME"]=>
["REMOTE_PORT"]=>
string(5) "46922"
["REDIRECT_QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REDIRECT_URL"]=>
["GATEWAY_INTERFACE"]=>
string(7) "CGI/1.1"
["SERVER_PROTOCOL"]=>
string(8) "HTTP/1.1"
["REQUEST_METHOD"]=>
string(3) "GET"
["QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REQUEST_URI"]=>
["SCRIPT_NAME"]=>
string(21) "/software-search.html"
["PHP_SELF"]=>
string(21) "/software-search.html"
["REQUEST_TIME_FLOAT"]=>
float(1601079679.255)
["REQUEST_TIME"]=>
int(1601079679)
}
```
``` SERVER:array(45) {
["REDIRECT_UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["REDIRECT_SCRIPT_URL"]=>
["REDIRECT_SCRIPT_URI"]=>
["REDIRECT_PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["REDIRECT_HTTPS"]=>
string(2) "on"
["REDIRECT_SSL_TLS_SNI"]=>
["REDIRECT_STATUS"]=>
string(3) "200"
["UNIQUE_ID"]=>
string(27) "X26Jf6BhoK0MXstYZErX3gAAAGs"
["SCRIPT_URL"]=>
["SCRIPT_URI"]=>
["PERL5LIB"]=>
string(49) "/usr/share/awstats/lib:/usr/share/awstats/plugins"
["HTTPS"]=>
string(2) "on"
["SSL_TLS_SNI"]=>
["HTTP_USER_AGENT"]=>
string(40) "CCBot/2.0 (https://commoncrawl.org/faq/)"
["HTTP_ACCEPT"]=>
string(63) "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8"
["HTTP_ACCEPT_LANGUAGE"]=>
string(14) "en-US,en;q=0.5"
["HTTP_IF_MODIFIED_SINCE"]=>
string(29) "Tue, 10 Dec 2019 20:17:58 GMT"
["HTTP_ACCEPT_ENCODING"]=>
string(7) "br,gzip"
["HTTP_HOST"]=>
["HTTP_CONNECTION"]=>
string(10) "Keep-Alive"
["PATH"]=>
string(49) "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"
["SERVER_SIGNATURE"]=>
string(0) ""
["SERVER_SOFTWARE"]=>
string(52) "Apache/2.4.6 (CentOS) OpenSSL/1.0.2k-fips PHP/5.4.16"
["SERVER_NAME"]=>
string(11) "45.55.49.28"
["SERVER_PORT"]=>
string(3) "443"
string(11) "3.92.74.105"
["DOCUMENT_ROOT"]=>
["REQUEST_SCHEME"]=>
string(5) "https"
["CONTEXT_PREFIX"]=>
string(0) ""
["CONTEXT_DOCUMENT_ROOT"]=>
["SCRIPT_FILENAME"]=>
["REMOTE_PORT"]=>
string(5) "46922"
["REDIRECT_QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REDIRECT_URL"]=>
["GATEWAY_INTERFACE"]=>
string(7) "CGI/1.1"
["SERVER_PROTOCOL"]=>
string(8) "HTTP/1.1"
["REQUEST_METHOD"]=>
string(3) "GET"
["QUERY_STRING"]=>
string(33) "keywords_encoded=beam-calculation"
["REQUEST_URI"]=>